Newsletter
For more information on the
following newsletters submit your details to us under contact us
Newsletter No. 1 - International competitive sheet analyzed by Chemplast
Newsletter No. 2 - Is TFE the same as PTFE?
Newsletter No. 3 - Is glass in PTFE always the same
stuff?
Newsletter No. 4 - Is PTFE and Teflon®
always the same stuff?
Newsletter No. 5 - Wear behaviour of PTFE compounds
under sliding conditions
Newsletter No. 6 - How do you know when it is PTFE and
when PTFE should be used?
Newsletter No. 7 - Friction behavior of Filled PTFE
Compounds
Newsletter No. 8 - Did you know that PTFE is a
crystalline product?
Newsletter No. 9 - More about those crystals
Newsletter No. 10 - Putting the heat on PTFE
Newsletter No. 11 - A 1% change that can crack PTFE
Newsletter No. 12 - Can PTFE beat rubber on cost?
Newsletter No. 13 - Now that's a strange product name!
Newsletter No. 14 - Tolerances can get you or lose you
the order!
Newsletter No. 15 - PTFE, "old bags" and
tolerance
Newsletter No. 16 - PTFE and computers in good old
moulding?
Newsletter No. 17 - PTFE and computers… more
about moulding
Newsletter No. 18 - Processing with computers …
PFA modelling
Newsletter No. 19 - Is PTFE a declining growth
product?
Newsletter No. 20 - Encouraging PTFE growth
Newsletter No. 21 - Fluorocarbon growth sectors
Newsletter No. 22 - PTFE combined with other materials
Newsletter No. 23 - PTFE and steel
Newsletter No. 24 - PTFE, GLASS and BRONZE
Newsletter No. 25 - PTFE Processes
Newsletter No. 26 - PTFE Processes - The role of
Temperature
Newsletter No. 27 - Teflon Processes - The other
moulding alternatives
Newsletter No. 28 - Dog Bones and PTFE? What's the
connection?
Newsletter No.29 - Various types of tensiles for PTFE?
What do they mean?
Newsletter No. 30 - What is ISO 13000 to PTFE?
Newsletter No. 31 - Don't be a Dumbo with Dumbells
Newsletter No. 32 - Understanding the Tensile strength
of Filled PTFE
Newsletter No. 33 - Surprising facts about Carbon
Filled PTFE
Newsletter No. 34 - Glass in Filled PTFE - Some new
facts
Newsletter No. 35 - Glass shapes and what they mean
Newsletter No. 36 - Winning new business with high
performance KEYLON®
Newsletter No. 37 - More ways to win new business with performance KEYLON®
grades
Newsletter No. 38 - Was PTFE already in the World before Adam? (A lighted look
at infinity)
Newsletter No. 39 - SG - It's really important to PTFE
quality
Newsletter No. 40 - SSG - A parameter unique to PTFE
quality
Newsletter No. 41 - SG - What is out there in the
MARKET?
Newsletter No. 42 - Permeation in Lined Piping
Fundamental Considerations
Newsletter No. 43 - Permeation in Lined Piping Key
issues
Newsletter No. 44 - Permeation in Lined Piping paste
extrusion - Practical Results
Newsletter No. 45 - Permeation in Lined Piping
Comparing processing methods
Newsletter No. 46 - Permeation in Lined Piping
Conclusions and rules of thumb
Newsletter No. 47 - Could PTFE be grown on Corn? (A
light-hearted look at BIO-PLASTICS)
Newsletter No. 48 - The perfect bearing pad material?
Newsletter No. 49 - The bearing pad applications?
Newsletter No. 50 - Composite bearing pads?
Newsletter No. 51 - The basics of bearing pad design?
Newsletter No. 52 - Tensile tests and other standards
of bearing pads?
Newsletter No. 53 - The basics of plastic piping
choice?
Newsletter No. 54 - Will your plastic piping last?
Newsletter No. 55 - The application limit of PTFE Lined piping
Newsletter No. 58 - Extended temperature ranges with lined piping – Part 2
Newsletter No. 59 -
Ambient temperature? Why does that matter?
Newsletter No. 61 - Melt processables
Newsletter No. 62 - Why transfer mould?
Newsletter No. 63 -
Automatic moulding
Newsletter No. 64 -
Fluorination of polyethylenes
... A technically interesting process
Newsletter No. 65 - PCTFE
or Kel-F - where it is best used
Newsletter No. 66 -
Fluoro-sintered grade for extruders
Newsletter No. 67 - Mix Oil and Sand to make PTFE?
Newsletter No. 68 - Marketing air!
Newsletter No. 69 -
Commercial Grade PTFE!
Newsletter No. 70 -
Mechanical Grade PTFE!
Newsletter No. 71 - Just
pigmentation or added sizzle?
Newsletter No. 73 - PTFE Gaskets - Practical
Considerations
Newsletter
No. 74 - High Performance PTFE Gasket
Sheeting
Newsletter
No. 75 - PTFE Gaskets - Installation - Key
Points
Newsletter
No. 76 - PVC pipe - curing times...minutes
or hours?
Newsletter
No. 77 - PVC Pipes and Fittings sometimes
don’t fit....Why?
Newsletter
No. 78 - Tensile Strength - Too much stress
can cause us to crack
Newsletter
No. 79 - Tensile Strength – The
cracks you don’t see should worry you most!
Newsletter
No. 80 - Tensile Strength - Stress relief
and avoiding stress
Newsletter
No. 81 - Tensile Strength - Be careful to
stay in shape
Newsletter
No. 82 - The Gravity of specific gravity
Newsletter
No. 83 - Too good to be true?
Newsletter
No. 84 - Too good to be true?...Part 2
Newsletter
No. 85 - A grave risk!
Newsletter
No. 86 - Polypropylene....always the same?
Newsletter No. 87- The
life of PTFE … Walking with thermometer.
Newsletter No. 88- High
Tech polymers /Hi Tech PVC
Newsletter No. 89- High
Tech polymers /Hi Tech polypropylene
Newsletter No. 90- High
Tech polymers / High Tech polyethylene
Newsletter No. 90- High
Tech polymers / polyethylene
Newsletter No. 91-
Comparing Materials / PTFE OR ETFE
Newsletter No. 93- Some
special properties of PTFE
Newsletter No. 95- Some
special properties of PTFE /Part 2
Newsletter No. 96-
Environmental Stress Cracking /Part 1
Newsletter No. 97-
Environmental Stress Cracking /Part 2
Newsletter No. 98-
Environmental Stress Cracking /Part 3
Newsletter No. 99-
Interesting Properties / Real Cool
Newsletter No. 100-
Interesting Properties /Seriously Strong
About us / Products
/ Links / Contact us / Newsletter / Home / Search